Skip to main content

A NSW Government website

Worker injured when pulling electrical cable with an integrated tool carrier

At Cadia East Operations on 1 September 2020 workers were underground installing a high voltage cable from an integrated tool carrier (ITC) fitted with a man-basket. The workers connected a tow rope from the end of the cable to a handrail in the man-basket. The rope was fed through a series of cable rollers, with the intention that the ITC would be trammed backward to pull the rope and cable through rollers suspended from the roof. During the pull, the rope became stuck in the rollers and tension in the rope increased, leading to the handrail being torn off the basket. An electrician positioned inside the man-basket was struck in the torso by the handrail as the rope recoiled.

Read the full Investigation Information Release (PDF, 721.24 KB)

Recent Articles

Investigation

The Resources Regulator in NSW has accepted a WHS undertaking from Grahams Quarry Cedar Point Pty Ltd following an investigation into an

NSW government logo

Investigation

The Resources Regulator in NSW has published an investigation report into an incident in which a worker suffered the amputation of his left

Jumbo incident

Safety

The Resources Regulator in NSW has issued a safety bulletin following a concerning increase in heavy vehicle rollovers in the past 12 months

NSW government logo